Frequently Asked Questions (FAQs)
I want to plug my Chronomite Tankless Water Heater into a wall outlet. Where is the plug?
Chronomite Tankless Water Heaters are U.L. listed. The U.L. listing requires that the heater be "hardwired" to a dedicated breaker. To gain optimum performance and to keep the product under warranty, it must be installed in this manner. Please refer to our Installation and Operation sheet for the model you are installing.
Current models with a plug:
- Chronomite Mini Tank Water Heater
Can I install my Chronomite Tankless Water Heater in a vertical position?
Chronomite Tankless Water Heaters are designed for a horizontal installation. When installed properly, the heater will have the inlet and outlet on the right side of the unit when you are facing it. If installed in a vertical position, you will risk a burn out of the heating coils and the heater will not be covered under the warranty. Please refer to our Installation and Operation sheet for the model you are installing.
Why is my Chronomite Tankless Water Heater tripping the breaker?
Confirm that the heater has been hardwired to a dedicated, non-GFI breaker. Also check that the breaker size is appropriate for the heater being installed (Example: if it is a 30 amp heater, it will need a 30 amp breaker). Please refer to our Installation and Operation sheet for the model you are installing.
Also check that the breaker size is appropriate for the water heater and the electric wire gauge being installed.
How do I decrease the water temperature coming from my Chronomite Tankless Water Heater?
- The SR series is designed to provide a predetermined temperature rise to the incoming cold water. To decrease the water temperature, manually increase the water flow.
- The M series is factory preset for consistent water temperature and is not adjustable, but is available in 104°F, 110°F, and 120°F. Other temperature settings are also available.
- The E, R, ER and ERB series all have an external temperature adjustment as standard equipment, range of 70°F - 125°F.
- Excluding High Activation models used in Safety applications for Eyewash/Face Wash Stations and Safety Drench Showers which are preset at 84°F. For safety reasons there is no external temperature adjustment.
May I install my Chronomite Tankless Water Heater outside?
Chronomite Tankless Water Heaters are subject to freezing. If being installed outdoors it is necessary, ensure that your water heater is installed in an enclosure and not be exposed to the elements. The heater should also be winterized in the same manner as any other outdoor products which utilizes water.
Will a Chronomite Tankless Water Heater supply my whole house?
Chronomite Tankless Water Heaters are designed for point-of-use applications. They are not designed to supply hot water to an entire house.
- R & ER Series are used in Centralized/Whole House applications.
Can I install my Chronomite Tankless Water Heater in the ceiling?
Chronomite Tankless Water Heaters are designed for point-of-use applications. For optimum use, they should be installed within 18" from the point-of-use. Please refer to our Installation and Operation sheet for the model you are installing.
What phase are your heaters?
Chronomite Tankless Water Heaters are Single and Three Phase Power. Single Phase is offered in SR, M, E, R and ER series.
What voltage is my heater and is it okay if it doesn't match?
Chronomite Tankless Water Heaters are designed to be volt specific. For optimum performance and to maintain warranty, the heater must be wired for the correct voltage. The voltage for the heater can be found on the label, which is adhered to the front of the unit. Please refer to our Installation and Operation sheet for the model you are installing.
Are compression fittings supplied with the heater?
- SR, M, & E Series come standard with two compression fittings; ⅜” x ¼” Male NPT
- R Series with ¾” Male NPT Fittings
- ER Series is ¾” Female NPT Fitting
What size copper or flex tubing do I use?
3/8" OD as per installation instructions.
Do I need electrical applied to the heater to know if the heater will turn on?
Chronomite Tankless Water Heaters are flow and pressure activated. When you turn on the faucet, you will be able to hear the flow switch make a faint clicking sound. This is with or without the electricity turned on to the unit.
What is the maximum operating temperature?
It is 140ºF ambient air as per the Underwriter's Laboratories listing. Maximum water temperature is 160ºF
Where are the heaters manufactured?
Chronomite Laboratories, Inc. is located in City of Industry, CA. USA
Are Chronomite Tankless Water Heaters ASSE 1070 certified?
ASSE 1070 is a mixing valve code relating to water temperature limiting devices, and is designed to limit incoming high hot water supply temperature (120°F - 180°F) to normal, tempered water temperatures (105°F - 110°F) in order to minimize the risk of scalding to the end user.
The ASSE standard is specific for water temperature limiting devices, and not for water heaters alone. The various test procedures of this standard require that the device must have a hot water inlet, a cold water inlet and a mixed water outlet.
Chronomite offers the M-MM Series which has an integral mixing valve and is certified for ASSE 1070. The AP-12 valve assembly consists of IAPMO certified mixing valve, appropriate piping and fittings. Reference IAPMO R & T certificate #7257
How can I cross reference a competitor’s model with a Chronomite Tankless Water Heater?
Use the links below to be redirected to our Search Cross Reference Tool. You will then select a Manufacturer from the first dropdown (ex: Eemax) and then enter the cross reference number into the second field (ex: SP1812) then hit "Search."
Which models can be used in recirculating applications?
All E, R, ER & ERB Series can be used in recirculating applications.